SELE - JET #4015G742
2+2旋转喷嘴座带有快速接头和"止流2"
SELEJET快速接头喷嘴座带止流阀
The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatment
Stainless steel screw and nut are included
FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.
*Pneumatically-operated valve, normally closed
*Side 1/8” female air coupling, with adjustable position
*Applicable on any anti-drip nozzle holder
*Made of polypropylene reinforced with fiberglass
*Seals in Viton®, spring in stainless steel
*Air consumption 0.0069 l/cycle (0.0146 cfm)
The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatment
Stainless steel screw and nut are included
FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.
*Pneumatically-operated valve, normally closed
*Side 1/8” female air coupling, with adjustable position
*Applicable on any anti-drip nozzle holder
*Made of polypropylene reinforced with fiberglass
*Seals in Viton®, spring in stainless steel
*Air consumption 0.0069 l/cycle (0.0146 cfm)
添加到收藏夹
国际市場
| 编码 | -D- | F | 材质 | 管路 | air (min) | 最大压力 |
|---|---|---|---|---|---|---|
| 4015G75A2 | 25 mm | 10mm | Teflon® | 2 | 3.8bar | 8bar |
| 4015G762 | 1" | 10mm | Teflon® | 2 | 3.8bar | 8bar |
| 4015G7221 | 20 mm | 10mm | Teflon® | 2 | 3.8bar | 8bar |
| 4015G742 | 1/2" | 10mm | Teflon® | 2 | 3.8bar | 8bar |
收藏的产品
- 特点
- 技术数据
- 下载
SAEJ1939: Position of the SAEJ1939 ball valve (by 1° steps) - SWITCH ON-OFF: Position of the 2/3-wire valve ball
The gearmotor of the 853 valves can be easily separated from the valve body and oriented in any position by loosening the collar and rotating the motor in positions of 90°.
TECHNICAL FEATURES
STANDARD MOTOR
- DIN 43650 FORM B connector
MOTOR WITH POSITION INDICATOR
- AMP Superseal® 1.5 3 POS. connector
- Opening/closing indicator
- Power supply and command status LED
- Breather membrane in PTFE
3 wire operation
- 12 Vdc power supply, always connected
- With opening/closing command supplied with 12 Vdc, the valve turns clockwise.
- Disconnecting the command power supply, the valve turns counter-clockwise.
2 wire operation
- Rotation obtained by inverting the power supply polarity with a double switch.
In both cases, the motor absorbs current only during the valve movement.